Transfer paper for polymer clay 019

TRANSFER INSTRUCTIONS

How to apply the transfer technique on polymer clay

TIP: This type of transfer paper works by direct contact with the surface of the clay and does not require water. Follow these steps for best results:

Materials:

• Polymer clay (preferably white or light colored)
• UY! transfer paper
• Roller
• Aluminum foil
• UV resin or varnish

Step-by-step instructions:

1. Prepare the clay:

• Condition the clay well so that it is pliable and moist. Avoid using dry or brittle clay, as moisture is key to a good transfer.

2. Extend the clay:

• Roll out a sheet of clay to the desired thickness.

3. Place the image:

• Place the transfer paper, printed side down, on the surface of the clay.

4. Apply pressure:

• Use a rolling pin to make sure all the paper makes even contact with the clay.
• Gently rub the surface of the paper so that it adheres well.

5. Let stand:

• Let the clay rest with the transfer paper attached for 30 minutes.

6. Remove the base paper:

• After the resting time, the film with the printed image will stick to the clay and the base paper will come off easily.
• The image may look slightly dull, this is normal. The printed film will melt during firing.

7. Cut the pieces:

• Cut out the desired pieces with the clay already transferred. You can also pre-cut the clay before applying the transfer to optimize the use of paper.

8. Baking:

• Bake the pieces according to the clay manufacturer's instructions. Protect the pieces with aluminum foil to prevent damage during baking.
• When the temperature rises, the image film will fuse with the clay, revealing the intense colors.

9. Finish with a seal:

• Once out of the oven and when the pieces have cooled, apply UV resin or varnish (in two coats) for a glossy and durable finish.

Additional tip:
For best results, it is crucial to use white or very light colored clay, as the color of the base influences the intensity and clarity of the transferred image.